FAQ
What about working with pure iron, pure copper, and nickel?
The reason for a shorter lifespan is due to their affinity with cobalt contained in carbide.
We have received great praise for our MC20 that controls this adhesion with lowered affinity to these materials.
Q&A in the same category in this question
-
パンチ、ダイ、ストリッパーに推奨する材種は何ですか？
条件によって違いますので、一概には言えません。ユーザーによって色々です。
パンチ EF10、ダイ KD20などが比較的多く使用されています。
ダイの切刃及びストリッパーなどワイヤー加工の場合は、超微粒子合金は不向き（電解腐食など）なケースもありますので、まずはご相談ください。 -
Can A10W be considered for use in electrical machining?
We believe A10W can be used safely even in electrical machining.
Fine particle grain cemented carbide inhibit crack propagation through mixing coarse-sized grain, and the heat affected layer's thickness is reduced through lowering the amount of Co. This is why we recommend A10W for wire EDM. -
We are using carbide for press processing of stainless materials, but compared to SPCC, abrasion occurs quickly and parts must be replaced.
Stainless materials are hard and tough, which leads to greater abrasion and chipping of the tool.
We recommend using KX01, as it has superior toughness and resistance to heat, and is extremely hard.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details