We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What carbides have excellent chipping and abrasions resistance for cutting and bending materials of C5191, C5210 (phosphor bronze), and C1020 (pure copper)?
Results 1: C5191, C5210 (phosphor bronze): KD20
Results 2: C5210 stamping connector, die: KD40 punch:KD20 stripper:G4
Results 3: C5210 stamping/bending connector EF01
Results 4: C1020 (pure copper) MC20
Q&A in the same category in this question
-
We are using carbide for press processing of stainless materials, but compared to SPCC, abrasion occurs quickly and parts must be replaced.
Stainless materials are hard and tough, which leads to greater abrasion and chipping of the tool.
We recommend using KX01, as it has superior toughness and resistance to heat, and is extremely hard. -
We are using fine grain and ultra fine grain carbide parts with wire cutting and EDM machines, but chipping occurs often during use.
Try our A10W.
This material maintains the transverse rupture strength of KD20, while having resistance to thermal cracking during EDM/WEDM improved. -
Which carbide material is the most resistant to abrasion?
The SS Grade carbide, made for abrasion resistance.
SS13 and SS15 have the hardness of HV2450 and HV2100, respectively.
These materials are not very tough, so it is recommended that you use them under a low load.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details