FAQ
How do you store cemented carbide products?
For cemented carbide materials:
Storing at room temperature is fine. (Less than 300 in Celsius, as cobalt oxidizes at that temperature)
Humidity will leads to rusting, so we recommend storing the materials in an area with low humidity.
For complete metal molds:
Cemented Carbide corrosion can occur from grinding fluid, lubricating liquid, or other liquids.
If the grinding or lapping surface is not stored properly, corrosion may occur.
Store using a rust preventive oil or paper.
Q&A in the same category in this question
-
超硬材の硬度はどのくらいですか？
硬度はHRA88～92が一般的です。
硬度が高いと耐摩耗性は高くなりますが、耐衝撃性は悪くなり、欠けやすくなります。 -
Why does the amount of Co and WC particle size affect the thickness of the heat affected layer?
It is thought that when Co is in large quantities the fusing point is lowered, which increases the amount that melts and thickening the damaged layer.
It is also thought that when WC particle size is small, the material becomes easier to melt due to the volume effect, which thickens the damaged layer. -
What are the effects of corrosion?
We checked a cemented carbide made 20 years ago, and verified 20 microns worth of corrosion.
Only the surface was corroded, so we were able to remove it by reprocessing it.
However, there are cases where some corrosion cannot be removed due to working environments, so we recommend regrinding if the corrosion is 0.1mm or greater. If storing after regrinding, ensure that all processing liquids have been removed and dried. Apply the carbide with rust preventive oil or paper, or cover in alumina powder.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details