We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What is the relationship between hardness and strength?
Hardness affects resistance to abrasion, and harder the material the more resistant it is to abrasion.
However, amount of abrasion is not only determined by hardness, but could be affected by adhesions caused by workpieces of certain materials.
Thickness also affects the life of material, and so the environment and manufacturing process must be taken into consideration when selecting cemented carbide grade.
There are many factors related to strength, such as transverse rupture strength, impact strength, fracture toughness value and others, therefore material selection must be made in consideration of these factors.
Q&A in the same category in this question
-
Why does the amount of Co and WC particle size affect the thickness of the heat affected layer?
It is thought that when Co is in large quantities the fusing point is lowered, which increases the amount that melts and thickening the damaged layer.
It is also thought that when WC particle size is small, the material becomes easier to melt due to the volume effect, which thickens the damaged layer. -
Why is there a 50% change in volume?
Carbide is a material made by compacting powder during sintering, and there are some gaps inside the carbide where air and particles collide.
Through sintering, the cobalt liquefies, and a 50% reduction in volume occurs when tungsten particles are attracted due to the capillary phenomenon. The contacting surfaces of different powdered particles try to mix and homogenize, inducing the atoms to move in an attempt to create new compounds. -
What are the effects of corrosion?
We checked a cemented carbide made 20 years ago, and verified 20 microns worth of corrosion.
Only the surface was corroded, so we were able to remove it by reprocessing it.
However, there are cases where some corrosion cannot be removed due to working environments, so we recommend regrinding if the corrosion is 0.1mm or greater. If storing after regrinding, ensure that all processing liquids have been removed and dried. Apply the carbide with rust preventive oil or paper, or cover in alumina powder.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details