We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What causes cemented carbide to crack?
Compared to metal materials, cemented carbide materials have a different thermal expansion coefficient. For this reason, cracks may occur in shrink/cooling-fitted products when the operating temperature is significantly higher (lower) than the designed value. When using cemented carbides with high hardness, problems such as cracking may occur by high impact, so the required fracture toughness value should also be carefully considered.
Q&A in the same category in this question
-
What are the weaknesses of cemented carbides?
Compared to general iron alloys, cemented carbide has lower toughness, which may cause chipping or peeling of the cutting edge.
In addition, as the relative density is about twice that of iron, the heavier weight of cemented carbide may be a disadvantage. -
How do you store cemented carbide products?
For cemented carbide materials:
Storing at room temperature is fine. (Less than 300 in Celsius, as cobalt oxidizes at that temperature)
Humidity will leads to rusting, so we recommend storing the materials in an area with low humidity.
For complete metal molds:
Cemented Carbide corrosion can occur from grinding fluid, lubricating liquid, or other liquids.
If the grinding or lapping surface is not stored properly, corrosion may occur.
Store using a rust preventive oil or paper. -
Why does the amount of Co and WC particle size affect the thickness of the heat affected layer?
It is thought that when Co is in large quantities the fusing point is lowered, which increases the amount that melts and thickening the damaged layer.
It is also thought that when WC particle size is small, the material becomes easier to melt due to the volume effect, which thickens the damaged layer.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details