FAQ
Which carbide material is the most resistant to abrasion?
The SS Grade carbide, made for abrasion resistance.
SS13 and SS15 have the hardness of HV2450 and HV2100, respectively.
These materials are not very tough, so it is recommended that you use them under a low load.
Q&A in the same category in this question
-
パンチ、ダイ、ストリッパーに推奨する材種は何ですか？
条件によって違いますので、一概には言えません。ユーザーによって色々です。
パンチ EF10、ダイ KD20などが比較的多く使用されています。
ダイの切刃及びストリッパーなどワイヤー加工の場合は、超微粒子合金は不向き（電解腐食など）なケースもありますので、まずはご相談ください。 -
What carbides have excellent chipping and abrasions resistance for cutting and bending materials of C5191, C5210 (phosphor bronze), and C1020 (pure copper)?
Results 1: C5191, C5210 (phosphor bronze): KD20
Results 2: C5210 stamping connector, die: KD40 punch:KD20 stripper:G4
Results 3: C5210 stamping/bending connector EF01
Results 4: C1020 (pure copper) MC20 -
We are using carbide for press processing of stainless materials, but compared to SPCC, abrasion occurs quickly and parts must be replaced.
Stainless materials are hard and tough, which leads to greater abrasion and chipping of the tool.
We recommend using KX01, as it has superior toughness and resistance to heat, and is extremely hard.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details