We solve difficult problems with integrated support from carbide materials to finished product manufacturing!
FAQ
What is the difference between cemented carbide and ceramics?
The hardness of ceramics approaches that of diamond, the hardest mineral on earth. If the hardness of diamond is 10, ceramics exhibit a hardness of 9 or higher, which is harder than tungsten and other hard metals. The difference in composition also results in a heavier weight in the case of cemented carbides. However, cemented carbides can be made with various characteristics depending on tungsten carbide (WC) particle size, the amount of bonding material, and additives, so it is possible to select the most suitable grade for the application from a wide range of available grades.
Q&A in the same category in this question
-
What causes cemented carbide to crack?
Compared to metal materials, cemented carbide materials have a different thermal expansion coefficient. For this reason, cracks may occur in shrink/cooling-fitted products when the operating temperature is significantly higher (lower) than the designed value. When using cemented carbides with high hardness, problems such as cracking may occur by high impact, so the required fracture toughness value should also be carefully considered.
-
Are there any changes due to thermal conductivity?
Thermal conductivity is based on the amount of Co. Lower Co levels lead to higher conductivity.
Generally, higher conductivity means that heat escapes well and frictional heat can be controlled. -
Why does the amount of Co and WC particle size affect the thickness of the heat affected layer?
It is thought that when Co is in large quantities the fusing point is lowered, which increases the amount that melts and thickening the damaged layer.
It is also thought that when WC particle size is small, the material becomes easier to melt due to the volume effect, which thickens the damaged layer.
-
Catalog
We will provide high value-added cemented carbide with the achievements and know-how cultivated so far.
Download -
Consultation and Inquiry
We solve your problems by providing integrated solutions from material selection/development to precision machining and provision of finished products.
Contact us -
FAQ
We have posted the contents of many inquiries from customers in the past.
Click for details